1 | /* -*-c++-*- OpenSceneGraph - Copyright (C) 1998-2006 Robert Osfield |
---|
2 | * |
---|
3 | * This library is open source and may be redistributed and/or modified under |
---|
4 | * the terms of the OpenSceneGraph Public License (OSGPL) version 0.0 or |
---|
5 | * (at your option) any later version. The full license is in LICENSE file |
---|
6 | * included with this distribution, and on the openscenegraph.org website. |
---|
7 | * |
---|
8 | * This library is distributed in the hope that it will be useful, |
---|
9 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
---|
10 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
---|
11 | * OpenSceneGraph Public License for more details. |
---|
12 | */ |
---|
13 | |
---|
14 | #ifndef OSGSIM_SPHERESEGMENT |
---|
15 | #define OSGSIM_SPHERESEGMENT 1 |
---|
16 | |
---|
17 | #include <osgSim/Export> |
---|
18 | |
---|
19 | #include <osg/Vec3> |
---|
20 | #include <osg/Vec4> |
---|
21 | #include <osg/Geode> |
---|
22 | #include <osg/Matrixd> |
---|
23 | #include <osg/BlendFunc> |
---|
24 | |
---|
25 | namespace osgSim{ |
---|
26 | |
---|
27 | /** |
---|
28 | A SphereSegment is a Geode to represent an portion of a sphere (potentially |
---|
29 | the whole sphere). The sphere is aligned such that the line through the |
---|
30 | sphere's poles is parallel to the z axis. The sphere segment |
---|
31 | may be rendered various components switched on or off: |
---|
32 | |
---|
33 | - The specified area of the sphere surface. |
---|
34 | |
---|
35 | - An edge line around the boundary of the specified area |
---|
36 | of the sphere surface. |
---|
37 | |
---|
38 | - Four <i>spokes</i>, where a spoke is the line from |
---|
39 | the sphere's centre to a corner of the rendered area. |
---|
40 | |
---|
41 | - Four planar areas, where the planar areas are formed |
---|
42 | between the spokes. |
---|
43 | |
---|
44 | Caveats: |
---|
45 | |
---|
46 | - It's worth noting that the line through the sphere's poles is |
---|
47 | parallel to the z axis. This has implications when specifying the |
---|
48 | area to be rendered, and specifying areas where the centre of |
---|
49 | the rendered area <i>is</i> the Z axis may lead to unexpected |
---|
50 | geometry. |
---|
51 | |
---|
52 | - It's possible to render the whole sphere by specifying elevation |
---|
53 | and azimuth ranges round the full 360 degrees. When doing |
---|
54 | so you may consider switching the planes, spokes, and edge lines |
---|
55 | off, to avoid rendering artefacts, e.g. the upper and lower |
---|
56 | planes will be coincident. |
---|
57 | |
---|
58 | */ |
---|
59 | class OSGSIM_EXPORT SphereSegment: public osg::Geode |
---|
60 | { |
---|
61 | public: |
---|
62 | |
---|
63 | /** |
---|
64 | DrawMask represents a bit field, the values of which may be OR'ed together |
---|
65 | to specify which parts of the sphere segment should be drawn. E.g. |
---|
66 | \code |
---|
67 | sphereSegment->setDrawMask(SphereSegment::DrawMask(SphereSegment::SURFACE|SphereSegment::SPOKES)); |
---|
68 | \endcode |
---|
69 | */ |
---|
70 | enum DrawMask{ |
---|
71 | SURFACE = 0x00000001, ///< Draw the specified area on the sphere's surface |
---|
72 | SPOKES = 0x00000002, ///< Draw the spokes from the sphere's centre to the surface's corners |
---|
73 | EDGELINE = 0x00000008, ///< Draw the line round the edge of the area on the sphere's surface |
---|
74 | SIDES = 0x00000010, ///< Draw the planes from the sphere's centre to the edge of the sphere's surface |
---|
75 | ALL = 0x7fffffff ///< Draw every part of the sphere segment |
---|
76 | }; |
---|
77 | |
---|
78 | |
---|
79 | /** Default constructor. */ |
---|
80 | SphereSegment():osg::Geode(), |
---|
81 | _centre(0.0f,0.0f,0.0f), _radius(1.0f), |
---|
82 | _azMin(0.0f), _azMax(osg::PI/2.0f), |
---|
83 | _elevMin(0.0f), _elevMax(osg::PI/2.0f), |
---|
84 | _density(10), |
---|
85 | _drawMask(DrawMask(ALL)) |
---|
86 | { |
---|
87 | init(); |
---|
88 | } |
---|
89 | |
---|
90 | /** |
---|
91 | Construct by angle ranges. Note that the azimuth 'zero' is the Y axis; specifying |
---|
92 | an azimuth range from azMin -osg::PI/2.0f to azMax osg::PI/2.0f will cover the |
---|
93 | 'top half' of the circle in the XY plane. The elev angles are 'out' of the 'zero' |
---|
94 | XY plane with +ve angles above the plane, and -ve angles below. |
---|
95 | @param centre sphere centre |
---|
96 | @param radius radius of sphere |
---|
97 | @param azMin azimuth minimum |
---|
98 | @param azMax azimuth maximum |
---|
99 | @param elevMin elevation minimum |
---|
100 | @param elevMax elevation maximum |
---|
101 | @param density number of units to divide the azimuth and elevation ranges into |
---|
102 | */ |
---|
103 | SphereSegment(const osg::Vec3& centre, float radius, float azMin, float azMax, |
---|
104 | float elevMin, float elevMax, int density): |
---|
105 | osg::Geode(), |
---|
106 | _centre(centre), _radius(radius), |
---|
107 | _azMin(azMin), _azMax(azMax), |
---|
108 | _elevMin(elevMin), _elevMax(elevMax), |
---|
109 | _density(density), |
---|
110 | _drawMask(DrawMask(ALL)) |
---|
111 | { |
---|
112 | init(); |
---|
113 | } |
---|
114 | |
---|
115 | /** |
---|
116 | Construct by vector. |
---|
117 | @param centre sphere centre |
---|
118 | @param radius radius of sphere |
---|
119 | @param vec vector pointing from sphere centre to centre point |
---|
120 | of rendered area on sphere surface |
---|
121 | @param azRange azimuth range in radians (with centre along vec) |
---|
122 | @param elevRange elevation range in radians (with centre along vec) |
---|
123 | @param density number of units to divide the azimuth and elevation ranges into |
---|
124 | */ |
---|
125 | SphereSegment(const osg::Vec3& centre, float radius, const osg::Vec3& vec, float azRange, |
---|
126 | float elevRange, int density); |
---|
127 | |
---|
128 | /** Copy constructor */ |
---|
129 | SphereSegment(const SphereSegment& rhs, const osg::CopyOp& co): |
---|
130 | osg::Geode(rhs,co), |
---|
131 | _centre(rhs._centre), _radius(rhs._radius), |
---|
132 | _azMin(rhs._azMin), _azMax(rhs._azMax), |
---|
133 | _elevMin(rhs._elevMin), _elevMax(rhs._elevMax), |
---|
134 | _density(rhs._density), |
---|
135 | _drawMask(rhs._drawMask) |
---|
136 | { |
---|
137 | init(); |
---|
138 | } |
---|
139 | |
---|
140 | /** Set the centre point of the SphereSegment */ |
---|
141 | void setCentre(const osg::Vec3& c); |
---|
142 | |
---|
143 | /** Get the centre point of the SphereSegment */ |
---|
144 | const osg::Vec3& getCentre() const; |
---|
145 | |
---|
146 | /** Set the radius of the SphereSegment */ |
---|
147 | void setRadius(float r); |
---|
148 | |
---|
149 | /** Get the radius of the SphereSegment */ |
---|
150 | float getRadius() const; |
---|
151 | |
---|
152 | /** Set the area of the sphere segment |
---|
153 | |
---|
154 | @param vec vector pointing from sphere centre to centre point |
---|
155 | of rendered area on sphere surface |
---|
156 | @param azRange azimuth range in radians (with centre along vec) |
---|
157 | @param elevRange elevation range in radians (with centre along vec) |
---|
158 | */ |
---|
159 | void setArea(const osg::Vec3& vec, float azRange, float elevRange); |
---|
160 | |
---|
161 | /** Get the area of the sphere segment |
---|
162 | |
---|
163 | @param vec vector pointing from sphere centre to centre point |
---|
164 | of rendered area on sphere surface (normalized) |
---|
165 | @param azRange azimuth range in radians (with centre along vec) |
---|
166 | @param elevRange elevation range in radians (with centre along vec) |
---|
167 | */ |
---|
168 | void getArea(osg::Vec3& vec, float& azRange, float& elevRange) const; |
---|
169 | |
---|
170 | /** Set the area of the sphere segment |
---|
171 | @param azMin azimuth minimum |
---|
172 | @param azMax azimuth maximum |
---|
173 | @param elevMin elevation minimum |
---|
174 | @param elevMax elevation maximum |
---|
175 | */ |
---|
176 | void setArea(float azMin, float azMax, float elevMin, float elevMax); |
---|
177 | |
---|
178 | /** Get the area of the sphere segment |
---|
179 | @param azMin azimuth minimum |
---|
180 | @param azMax azimuth maximum |
---|
181 | @param elevMin elevation minimum |
---|
182 | @param elevMax elevation maximum |
---|
183 | */ |
---|
184 | void getArea(float &azMin, float &azMax, float &elevMin, float &elevMax) const; |
---|
185 | |
---|
186 | /** Set the density of the sphere segment */ |
---|
187 | void setDensity(int d); |
---|
188 | |
---|
189 | /** Get the density of the sphere segment */ |
---|
190 | int getDensity() const; |
---|
191 | |
---|
192 | /** |
---|
193 | Specify the DrawMask. |
---|
194 | @param dm Bitmask specifying which parts of the sphere segment should be drawn. |
---|
195 | @see DrawMask |
---|
196 | */ |
---|
197 | void setDrawMask(int dm); |
---|
198 | |
---|
199 | /** Get the DrawMask */ |
---|
200 | int getDrawMask() const { return _drawMask; } |
---|
201 | |
---|
202 | /** Set the color of the surface. */ |
---|
203 | void setSurfaceColor(const osg::Vec4& c); |
---|
204 | |
---|
205 | /** Get the color of the surface. */ |
---|
206 | osg::Vec4 getSurfaceColor() const { return _surfaceColor; } |
---|
207 | |
---|
208 | /** Set the color of the spokes. */ |
---|
209 | void setSpokeColor(const osg::Vec4& c); |
---|
210 | |
---|
211 | /** Get the color of the spokes. */ |
---|
212 | osg::Vec4 getSpokeColor() const { return _spokeColor; } |
---|
213 | |
---|
214 | /** Set the color of the edge line. */ |
---|
215 | void setEdgeLineColor(const osg::Vec4& c); |
---|
216 | |
---|
217 | /** Get the color of the edge line. */ |
---|
218 | osg::Vec4 getEdgeLineColor() const { return _edgeLineColor; } |
---|
219 | |
---|
220 | /** Set the color of the planes. */ |
---|
221 | void setSideColor(const osg::Vec4& c); |
---|
222 | |
---|
223 | /** Get the color of the planes. */ |
---|
224 | osg::Vec4 getSideColor() const { return _planeColor; } |
---|
225 | |
---|
226 | /** Set color of all components. */ |
---|
227 | void setAllColors(const osg::Vec4& c); |
---|
228 | |
---|
229 | META_Node(osgSim, SphereSegment); |
---|
230 | |
---|
231 | /** A list of vertex arrays representing a list of lines.*/ |
---|
232 | typedef std::vector< osg::ref_ptr<osg::Vec3Array> > LineList; |
---|
233 | |
---|
234 | /** Compute the interesection lines between subgraph and this sphere segment. |
---|
235 | * The matrix is the transform that takes the subgraph into the same coordiante frame as the sphere segment. |
---|
236 | * The resulting intersections are in the coordinate frame of the sphere segment. */ |
---|
237 | LineList computeIntersection(const osg::Matrixd& matrix, osg::Node* subgraph); |
---|
238 | |
---|
239 | /** Compute the interesection lines between specified drawable and this sphere segment. |
---|
240 | * The matrix is the transform that takes the subgraph into the same coordiante frame as the sphere segment. |
---|
241 | * The resulting intersections are in the coordinate frame of the sphere segment. */ |
---|
242 | LineList computeIntersection(const osg::Matrixd& matrix, osg::Drawable* drawable); |
---|
243 | |
---|
244 | /** Compute the interesection lines between subgraph and this sphere segment. |
---|
245 | * The matrix is the transform that takes the subgraph into the same coordiante frame as the sphere segment. |
---|
246 | * The resulting intersections are in the coordinate frame of the sphere segment. */ |
---|
247 | osg::Node* computeIntersectionSubgraph(const osg::Matrixd& matrix, osg::Node* subgraph); |
---|
248 | |
---|
249 | /** Compute the interesection lines between specified drawable and this sphere segment. |
---|
250 | * The matrix is the transform that takes the subgraph into the same coordiante frame as the sphere segment. |
---|
251 | * The resulting intersections are in the coordinate frame of the sphere segment. */ |
---|
252 | osg::Node* computeIntersectionSubgraph(const osg::Matrixd& matrix, osg::Drawable* drawable); |
---|
253 | |
---|
254 | |
---|
255 | private: |
---|
256 | |
---|
257 | void init(); // Shared constructor code, generates the drawables |
---|
258 | |
---|
259 | void dirtyAllDrawableDisplayLists(); // Force re-calling of gl functions |
---|
260 | void dirtyAllDrawableBounds(); // Force recalculation of bound geometry |
---|
261 | |
---|
262 | // SphereSegment is actually made up of a number of Drawable classes, |
---|
263 | // all of which are nested private classes, as declared below. These |
---|
264 | // classes are defined in the .cpp for minimum visibility and physical |
---|
265 | // coupling. (Reduces time spent compiling! :-) |
---|
266 | // |
---|
267 | // Each of the nested classes holds a pointer to the SphereSegment |
---|
268 | // 'parent', which stores the geometry details, and performs any |
---|
269 | // work required. The nested classes are lightweight objects which |
---|
270 | // just pass the work on. |
---|
271 | // |
---|
272 | // Why are things done with these sub-Drawables? Alpha-blended |
---|
273 | // Drawables need to be drawn last, depth sorted, and the various |
---|
274 | // components of a SphereSegment also need to be depth sorted |
---|
275 | // against one another (they may all be drawn with alpha blending). |
---|
276 | // Making these Drawables allows us to get the OSG to depth sort |
---|
277 | // for us. |
---|
278 | |
---|
279 | class Surface; |
---|
280 | friend class Surface; |
---|
281 | bool Surface_computeBound(osg::BoundingBox&) const; |
---|
282 | void Surface_drawImplementation(osg::State&) const; |
---|
283 | |
---|
284 | class EdgeLine; |
---|
285 | friend class EdgeLine; |
---|
286 | bool EdgeLine_computeBound(osg::BoundingBox&) const; |
---|
287 | void EdgeLine_drawImplementation(osg::State&) const; |
---|
288 | |
---|
289 | enum BoundaryAngle{MIN,MAX}; // Why here and not in Side class? Because we can't forward |
---|
290 | enum SideOrientation{AZIM,ELEV}; // declare enums, Side is in the .cpp, and this is tidier... |
---|
291 | class Side; |
---|
292 | friend class Side; |
---|
293 | bool Side_computeBound(osg::BoundingBox&, SideOrientation, BoundaryAngle) const; |
---|
294 | void Side_drawImplementation(osg::State&, SideOrientation, BoundaryAngle) const; |
---|
295 | |
---|
296 | class Spoke; |
---|
297 | friend class Spoke; |
---|
298 | bool Spoke_computeBound(osg::BoundingBox&, BoundaryAngle, BoundaryAngle) const; |
---|
299 | void Spoke_drawImplementation(osg::State&, BoundaryAngle, BoundaryAngle) const; |
---|
300 | |
---|
301 | // Sphere segment geometry details |
---|
302 | osg::Vec3 _centre; |
---|
303 | float _radius; |
---|
304 | float _azMin, _azMax, _elevMin, _elevMax; |
---|
305 | int _density; |
---|
306 | |
---|
307 | // Draw details |
---|
308 | int _drawMask; |
---|
309 | osg::Vec4 _surfaceColor; |
---|
310 | osg::Vec4 _spokeColor; |
---|
311 | osg::Vec4 _edgeLineColor; |
---|
312 | osg::Vec4 _planeColor; |
---|
313 | }; |
---|
314 | |
---|
315 | } |
---|
316 | |
---|
317 | #endif |
---|